Manitou Mezzer Pro 2025 Fork

Featuring 37mm stanchions and Manitou's Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it's also the lightest. How did Manitou manage to accomplish this you ask? Well, it's not hollow if that's what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, Manitou's proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once.

Dorado Air

The Manitou Dorado Air spring system contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.

IRT

Infinite Rate Tune (IRT) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that effects only the middle to end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up.

MC2

The Mezzer features Manitou's fully sealed cartridge MC2 Damper technology that provides an independent HSC circuit providing an adjustable high-speed blow off point combined with a LSC circuit providing adjustment for chassis control and small bump sensitivity. This cartridge utilises a bladder with a blow off valve to prevent rupture under high pressures and keep your damping controlled and consistent no matter the terrain.

Travel Change Made Easy

The Mezzer is internally travel adjustable from 180mm down to 140mm. This is done quite easily by adding or removing the supplied travel spacers included in every box.

• 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness
• Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalising negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalising the pressures to create an incredibly supple feel
• IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from initial spring rate to independently tune small bump sensitivity and big-hit performance
• Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilising a bladder, Manitou's new sealed cartridge maintains damping consistency in the most severe riding conditions
• 140mm to 180mm internally adjustable travel in 10mm increments (Travel spacers included)
• Integrated flexible mudguard can be installed/removed by three small screws threaded into the arch of the fork

• Wheel Size: 27.5-inch, 29-inch
• Offset: 37/44mm (27.5), 44/51mm (29)
• Ride Height: 534-574mm, 554-594mm
• Travel: 140-180mm Internally Adjustable In 10mm Increments
• Spring: Dorado Air with IRT
• Compression Damping: MC2 Sealed Cartridge
• Rebound Damping: Sealed Cartridge TPC
• Adjustments: Air, IRT Pressure, Rebound, HS And LS Compression
• Steerer: 1.5" Tapered
• Crown: Forged Aluminium, Hollow Bore
• Leg Diameter: 37mm
• Leg Material: 7000- Series Butted Wall Aluminium
• Brake Post Mount: 180mm (223mm Max)
• Axle: 15mm x 110mm Hexlock
• Max Tyre Size: 69mm with Mudguard 74mm Without
• Options: Mudguard Kit
• E-Pac: Yes 51mm Offset 140-160mm (29")
• Weight: 2000g (27.5), 2032g (29)